| TEXAS' EXCLUSIVE DANCO PRODUCTS DEALER!! |
TOWING EQUIPMENT
21' STEEL LYNX

STANDARD FEATURES
DECK: SUBFRAME:
21" x 3/16" Smooth Deck Rigid Reinforced Tubular Subframe
Grey or Black Paint Driver/Pass. Illuminated Controls
Removeable Deck Rails Built-In Safety Chain Storage
Heavy-Duty Tapered Approach Plate High Performance Wear Pads
Tie Down Key Slots
(4-Front, 2-Middle, 4 Rear) WHEEL LIFT:
Driver & Passenger - Chain Trays Danco Safety Flip Locking System
Steel Cab Protector 50ft. of 3/8" Winch Cable
8,000lb. High Speed Worm Drive Winch 4,000lb. Sliding Wheel Lift Grids
Cable Tensioner Plate Adjustable Slide-In Lift Arm Grids
Winch Free Spool Wheel Lift Straps w/Hooks
Wrecker Special Light Bar
Bed Anti-Tilt Feature ELECRICAL:
Weather Resistant Electrical System
HYDRAULICS: LED Light Package
Hydraulic Oil Reservior Light Bar Wiring Pkg. w/Switch Panel
Oil Filter w/Cartridge (2) Pair of Work Lights, Back-up Lights
Abrasion Resistant Hydraulic Hose Magnetic Tow Lights
Hydraulic Pump Back-up Alarm
Flexible Hose and Wire Tracking System
Cylinder Extra Length Push-Off GENERAL:
Chrome Plated Cylinder Rods Pre-Assembled & Factory Tested
Counter Balance Valves on Tilt & Lift Cyl. 30" Toolbox w/Locking Latch & Keys
(1) 4-Point Tie-down System
TIE-DOWNS: Rust Inhibitor Applied to All
(1) V-Chain w/Cluster Hooks Painted Components
(2) 10' Safety Chains w/Cluster Hooks Lubrication Fittings on All Pivot Points
w/Ratchets & Cluster Hooks
(2) Wheel Lift Straps w/Ratchets
CHASSIS RECOMMENDATIONS
Minimum GVRW - 15,000lbs.
Maximum GVRW - 26,000lbs.
![]()

8 Ton Prowler

STANDARD FEATURES
BOOM & UNDERLIFT: RUGGED SUBFRAME: Cab to Axle 60" Cab to Axle w/24" Tunnel Box 84" Cab to Axle w/36" tunnel Box 96" Cab to Axle w/36" + 24" Tunnel Box 120" Maximum Frame Height 38" Minimum GVWR 11,000lbs Maximum GVWR 26,000lbs. Minimum Frame RBM 280,000 in - lbs.
Prowler 6012 Series Retracted Extended Boom Rating at Boom Swivel 16,000 lbs. 8,000 lbs. Range of Elevation 0 - 45° 0 - 45° Lift Height - Ground to Hook 112" 156 ½” Reach Past Tailboard 36 ¾” 92 ¾” Reach Past Tailboard --- 43 ½”
Intergrated Boom & Underlift Package 60" Cab to Axle Rugged Structual Frame
Dual Power Boom Elevation Cylinders Dual Rear Hydraulic Stiff Legs w/D-Rings
Power Fold for Wheel Lift Storage Adjustable Stiff Leg Feet
(2) 8,000lb. Ramsey High Speed Winches (2) Rear Chain Anchors
Pilot Operated Holding Valves (2) Tailboard Chain Storage Compartments
Self Centering Crossbar
5,000lb. Sliding Wheel Lift Grids ELECTRICAL:
Adjustable Slide In Lift Arm Federal Standard 108 Lighting Package
Slide Behind Tire Bars LED Lighting
Wheel Lift Strap Hooks Weather Resistant Electrical System
(2) 3" Wide Frame Forks w/Receivers Junction Box w/Wire Harness
(2) Self Aligning Spring Forks Marker Light Pkg. Body & Pylon
Stop/Tail/Turn Lights in Pylon
HYDRAULICS: Tool Box Lighting
Hydraulic Oil Reservoir Wrecker Special Lightbar
10 Micron Oil Filter w/Cartridge Lightbar Switch Panel
Hydraulic Pump (1) Pair Low Mount Work Lights
Chrome Plated Cylinder Rods Back-Up Lights; Back-Up Alarm
Pilot Operated Holding Valves Magnetic Tow Lights
Power Beyond Valve for Stiff Legs
Aeroequip Hose & Fittings GENERAL:
Dual Wrecker Controls Aluminum Light Pylon
Driver Side Stiff Leg Controls (2) Alloy Safety Chains
(2) Wheel Lift Straps w/Ratchets
Lubrication Fittings on All Pivot Points
All Components for Complete Installation
Pre-assembled & Factory Tested
CHASSIS RECOMMENDATIONS
BOOM RECOVERY SPECIFICATIONS
Max Elevation
Min. Boom Elevation
Max Boom Elevation
UNDERLIFT SPECIFICATIONS
| Prowler 6012 Series | Retracted | Extended |
| Wheel Lift Rating | 12,000lbs. | 6,000lbs. |
| Range of Elevation | -15° Down | -100° Up |
| Tail Board to Center Line of Crossbar | 47 ½” | 76" |
| Tail Board to Center Line of Grid | 61 ½” | 90" |
| Tow Rating w/Forks | 12,000lbs. | 8,000lbs. |
| Center Line of Rear Axle to Tail Board | 35 ½” | 35 ½” |